GE PT878 user manual Delete Cancel

Chapter 3. Programming Site Data

3.8.1 Entering General-Purpose Analog Inputs (cont.)

2.The next prompt asks if you want to label the input.

a.Press [ENTER] to enter the text box. The text creation window appears, as shown in Figure 27 below.

A	B	C	D	E	F	G		H	I	J
K	L	M	N	O	P	Q		R	S	T
U	V	W	X	Y	Z	0		1	2	3
4	5	6	7	8	9		.	,	“	‘
=	<	>

Delete Cancel OK

Figure 27: Text Creation Window

b.Use the four arrow keys to scroll to the desired letter or symbol, and press [ENTER] to add the letter to the name.

Note: Pressing [SEL] causes the screen to show successively a set of upper-case (capital) letters, a set of lower-case letters, and a set of symbols. Use all three screens to create a desired label.

c.Repeat this procedure for each letter or symbol you wish to add to the name. If you wish to delete a letter, press [F1] (Delete) to erase each letter or symbol, from right to left on the label.

d.When you have completed the label, press [F3] (OK) to confirm the label, or [F2] (Cancel) to leave the window without adding the label.

Transport® Model PT878 Portable Liquid Flowmeter User’s Manual 51