GE PT878 user manual Entering Custom Cp Data in the Energy Option, Energy Option Inputs

Chapter 3. Programming Site Data

3.7.1 Entering Inputs in the Energy Option (cont.)

•To confirm the entries and return to Operate mode, press [F3] (OK). The PT878 returns to Operate Mode.

•To leave the window without confirming the entries, press [F2] (Cancel) or the [ESC] key. The PT878 returns to Operate Mode.

To enter data for Custom Cp calculations, proceed to the Custom Cp tab, discussed on page 46.

3.7.2 Entering Custom Cp Data in the Energy Option

To program Custom Cp tables in the Energy Option, return to the tabs at the top of the Energy Option window. Press the [X] arrow key until you have highlighted the Custom Cp tab, and press [ENTER]. The screen appears similar to Figure 23 below. To step through each parameter, press the [T] key.

Energy Options

Energy Option Inputs Custom Cp

Custom Cp

Edit Table

Density Source Fixed Table

90

Static Density

Density Table

Edit Table

Cancel

OK

Figure 23: Custom Cp Tab in the Energy Option

46 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual