GE PT878 user manual Entering a Calibration Factor

Chapter 3. Programming Site Data

3.11.3 Entering a Calibration Factor (cont.)

b.Use the numeric keys to enter the desired value for the data source, and press [ENTER] to confirm the entry.

c.Press the [X] key to move to the KFactor column. Use the numeric keys to enter the desired value, and press [ENTER] to confirm the entry.

d.Repeat steps b and c for the remainder of the table.

e.When you have completed entering values, press [F3] (OK) to confirm the table and return to the Correction Factors window.

You have completed entering data for correction factors.

•To confirm the entries and return to Operate mode, press [F3] (OK). The PT878 returns to Operate Mode.

•To leave the window without confirming the entries, press [F2] (Cancel) or the [ESC] key. The PT878 returns to Operate Mode.

70 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual