GE PT878 user manual Velocity, ft/s, Specifying the Number of Displayed Parameters

Chapter 5. Displaying and Configuring Data

5.5.1 Specifying the Number of Displayed Parameters

As mentioned earlier, the PT878 can display one to four different measurement parameters simultaneously. However, sometimes you might wish to display only one or two parameters. To change the number of open display windows from within the Site Menu (shown in Figure 61 on page 97), use the [T]or [S] arrow keys to move to the desired number of views (1 View, 2 Views, etc.) Press [ENTER].

The screen displays the designated number of windows. For example, Figure 62 below shows the screen displayed in Figure 58 on page 92, reconfigured for a single view.

ABC.SIT	2000/11/30 09:53 AM
	Velocity, ft/s

12.2

-0.6014

-12.2

10 Seconds

E0: No Errors

Figure 62: Display Screen Configured for Single View

Note: The PT878 opens display windows clockwise from the upper left; that is, if you press “1 View,” the parameter displayed in the upper left window appears. If you press “2 Views,” the parameters shown in the two top windows appear. The view for “3 Views” adds the window in the lower left, and that for “4 Views” adds the window in the lower right.

98 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual