Chapter 3. Programming Site Data
30 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
3.2.2 Confirming Entries
•To confirm the entries and return to Operate mode, press [F3] (OK).
•To leave the window without confirming the entries, press [F2] (Cancel)
or the [ESC] key.
In either case, the PT878 returns to Operate Mode.
3.3 Entering Pipe Parameters
To enter the Pipe option, scroll to the Pipe entry on the Program Menu and
press [ENTER]. (From the Transducer window, you can scroll back up to the
Transducer tab and press the [X] arrow key to reach the Pipe window, and
press [ENTER].) The screen appears similar to Figure 15 below. To step
through each parameter, press the [T] key. Refer to Figure139 on page 222
of Appendix A, Menu Maps.
Note: Refer to the brochure Soundspeeds and Pipe Size Data (914-004) for
additional information about pipe sizes and soundspeeds.
Figure 15: Pipe Option Window
Transducer Lining Path
Transducer/Pipe
Pipe Fluid
Cancel
OK
Material Other
Sound Speed 600.3 m/s
5
ANSI
OD, mm
Wall, m m
2
Nominal Schedule
OD x PI, mm
15.708
Measure Wall with TGauge