Chapter 3. Programming Site Data
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual 63
3.11 Entering User Functions (cont.)
d. When you have completed the label, press [F3] (OK) to confirm the
label, or [F2] (Cancel) to leave the window without adding the label.
3. The next prompt asks for the Units Symbol.
a. Press [ENTER] to reopen the text creation window.
b. Repeat the procedure used for the Label (on page 62) to create the
Units Symbol.
c. When you have completed the label, press [F3] (OK) to confirm the
symbol, or [F2] (Cancel) to leave the window without adding the
symbol.
4. The next prompt asks you to select the number of decimal places.
a. Press [ENTER] to open the drop-down menu.
b. Scroll to the desired number of decimal places, ranging from 0 to 4.
c. Press [ENTER] to confirm the entry.
5. The final prompt asks for the function itself.
a. Press [ENTER] to open the function creation window, which appears
similar to Figure 34 on page64.
b. Use the four arrow keys to scroll to the desired function or table, and
press [ENTER] to confirm each entry. Use the numeric keys to enter
numeric values. Press [F1] (Delete) to remove any mistaken or
unwanted symbols or numbers.
Note: Pressing [SEL] causes the screen to alternate between a set of
symbols and functions and a list of user functions. Use both screens
to create the desired function.