Displaying and Configuring Data 6-11
April 2004

Customizing Softkeys

When the screen is in Operate mode, you might wish to access a
particular submenu frequently without the trouble of scrolling
through menus. Customizing the softkeys (the function keys —
[F1], [F2] and [F3]) allows you to access up to three submenus by
pressing the associated softkey. You can customize a softkey
from the Site Menu or from within a particular menu.
•To customize a softkey from the Site Menu:
1. Press [MENU].
2. From the Site Menu (shown in Figure 6-6 on page 6-9), use
the [T] or [S] arrow keys to move to the FKeys entry on the
menu. Press [ENTER]. The screen now appears similar to
Figure 6-8 below.
Figure 6-8: The FKeys Menu
3. Use the [T] or [S] arrow keys to move to the desired FKey
(1, 2 or 3) entry on the menu. Press [ENTER]. The Configure
FKey window opens, as shown in Figu re 6-9 on the next page.
Meter Logging Service
Velocity, ft/s
0.00
32
Delta-T, ns
0.10 0.0
Volume, l/s
E0: No Errors
Signal, dB
Save Now
1 View
2 Views
3 Views
4 Views
Drive Manager
Manager
Site Program
FKeys
4
About F2
F3
Clear F1
F1
Clear F2
Clear F3