Genicom microLaser 210 - page 104

Publication No. GEG-99054 Genicom Mar 00
5-20 microLaser 210 User Guide
Print Image Quality Problems
Black page Thetonercartridgeisoldor
damaged.
The high-voltage power supply may
be defective.
Replace the toner cartridge.
Contactyourdealeroranauthorized
service provider.
Blank page Thesealingtapeofthetoner
cartridge is not pulled out.
The printer feeds two or more
sheets at a time.
Thetonercartridgeisoldor
damaged.
Thetonerinthetonercartridgeis
low.
The high-voltage power supply may
be defective.
Pull out the sealing tape.
Avoid adding paper to a nearly full stack.
Replace the toner cartridge.
Replace the toner cartridge.
Contactyourdealeroranauthorized
service provider.
Partial blanks Theprint media is moist.
The print media is outside the
recommended specifications.
Thesealingtapeofthetoner
cartridge is not fully pulled out.
Removethe moist media and load new, dry
media.
Use the recommendedprint media.
Replace the toner cartridge.
Creased paper The print media is outside the
recommended specifications.
The print media is moist.
Use the recommendedprint media.
Removethe moist media and load new, dry
media.