
Mar 00 Genicom PublicationNo. GEG-99054
microLaser 210 User Guide 7-29
Moving the 550 Sheet Feeder
Moving the 550 Sheet FeederWhen moving the printer a short distance, you may leave the 550 sheet paper feeder attached.
However,when moving the p rinter a long distance, please remove the 550-sheet paper feeder to
avoid damaging either the printer or the feeder.
Moving the Printer and 550 Sheet Feeder a Short Distance
Use the followingprocedure to move the printer and 550 sheet feeder a short distance:
1. Turnthe printer off by pressing the [ O ] on the power switch o n the back of the printer.
2. Unplug the AC power cord from the AC wall outlet.
3. Disconnect the printer from the host computer.
4. Wait30 minutes for th e printer to cool.
5. Remove the tonercartridge and cover it with an opaque plastic sheet.
6. With the help of another person, carefully lift the printer and attached 550 sheet feeder and
move them to the new location.
7. Once the printer is in the new location, refer to the Installation Guide included in the origi-
nal printer packaging to reinstall the printer.
Moving the Printer and 550 Sheet Feeder a Long Distance
Use the followingprocedure to move the printer and 550 sheetfeeder a long distance:
1. Turnthe printer off by pressing the [ O ] on the power switch on the right side of the printer.
2. Unplug the AC power cord from the wall outlet and from the back of the printer.
3. Disconnect the printer from the host computer.
4. Remove the paper from all of the paper trays.
5. Wait30 minutes for th e printer to cool.
6. Remove the main paper tray.
7. Reach inside the open top tray and locate the two thumbscrews that are at the front left and
front right of the feeder.
8. Unscrew the two thumbscrews to release the feeder from the printer.
9. Lift the printer off of the 550 sheet feeder and place it on the floor or o n a table.
10. Repack the feeder in the original shipping box.
11. Removethetonercartridgeandplaceitinanopaqueplasticbag,thensealthebagwithtape
and place it in a sturdy box.
12. Repack the printer,p aper trays, AC power corda nd toner cartridge into the original shipping
box or boxes.
13. Once the feeder is in the new location, refer to“Installing the 550 Sheet Paper Feeders” on
page 3 to reinstall the paper feeder(s).
◆ ◆ ◆