Publication No. GEG-99054 Genicom Mar 00
4-18 microLaser 210 User Guide
Cleaning the Printer
1. Turnthe printer off by pressing the [ O ] on the power switch on the right side of the printer,
and disconnect the AC power cord from the wall outlet.
2. Usinga soft cloth that is slightly damp with cold water, wipethe printer covers and tray faces.
Use a very mild, non-abrasive soap to removeheavy dirt and toner stains.
3. Use a soft, dry cloth to thoroughly dry the covers and tray faces.
Do not use solvents or abrasivecleaners to clean printer covers. Use only cold water and a
very mild soap.