Mar 00 Genicom PublicationNo. GEG-99054
microLaser 210 User Guide 6-7
Solving DuplexerProblems
If the printer is not operational after you have removed the duplexer, refer to Chapter 5:
Troubleshooting.After correcting the printer problem, return to “Installing the Duplexer”
on page 6-2 and reinstall the duplexer.
Clearing Duplex Paper Jams
When an E7 error message is shown on the display screen, there is a paper jam in the duplexer. Use
the following procedure to clear a duplex paper jam:
1. If you are using the paper tray in its extended position, remove the paper tray from the
printer.
2. Squeeze the tabs on the rear of the printer and pull the rear cover toward you to open it.