Mar 00 Genicom PublicationNo. GEG-99054
microLaser 210 User Guide 8-13
Maintaining the Envelope Feeder
Maintaining the Envelope Feeder
The envelope feeder requires very little maintenance; however, with normal use you will need to
perform some routine maintenance tasks such as cleaning the envelope feeder.
Cleaning the Exterior of the Envelope Feeder
Through normal use the exterior of the envelope feeder may become dirty or staine d with toner.
Although exterior dirt should not affect printer performance, an occasional exterio r cleaning may
be necessary to maintain the appearance of the envelope feeder.
1. Turnthe printer off by pressing [ O ] on the power switch on t he right side of the printer.
2. Remove the plug of the AC power cord from the AC wal l outlet.
3. Using a soft cloth, slightly damp with cold water, wipe the envelope feeder covers and tray
faces. Usea very mild,non-abrasive soap to remove heavy dirt and toner stains.
4. Using a soft, dry cloth, thoroughly dry the covers and tray fa ces.
5. Insert the plug of the AC power cord into the AC wall outlet, and turn the printer on by
pressing [ I ] on the powerswitch on the right side of the printer.
CAUTION: Do not use solvents or abrasive cleaners to cleanenvelope feeder covers. Use
only cold water and a very mild soap t o clean covers.