Genicom microLaser 210

Mar 00 Genicom PublicationNo. GEG-99054

microLaser 210 User Guide 3-3

Control Panel Features

LED IndicatorsThe LED indicators also indicate printer status. The four indicators can each be on, off , or blink-ing, indicating different phases of printer operation. The table below explains the LED indicators.PushbuttonsThe control panel pushbuttons allow you to access and navigate menus, and also assist you in recov-ering from printer errors. The table below explains the functions of the eight pushbuttons.

LED Color When Off When On When Blinking

Green Printer is NOT

READY

Printer is READY N/A

Green Printer is IDLE Printer is ACTIVE

(processing a job)

Printer is WAITING (a partial job

hasbeen printed, and the printer

is waiting for additional job data)

Green POWER is off POWER is on Power Saver Mode ON

Yellow Printeris not in

error mode

There is an error that

requires user intervention,

such as a paper jam, a

service call required, etc.

N/A

Pushbutton Function

START/STOP—Pushthis button to start or stop the printer, or to exit the menu

system.

MENU—Push this button to enterthe menu system.

NEXT—Push this button to move to the next menu, submenu, or setting within

thesamelevelofthemenustructure.

SELECT—Push this button to select the menu or submenu that is shown on

the second line of the display or to choose and save the setting shown on the

second line of the display.

CANCEL—Push this button to cancel an action.