Genicom microLaser 210 - page 111

Mar 00 Genicom PublicationNo. GEG-99054
microLaser 210 User Guide 5-27
Warning Messages and Error Messages
Warnin g Message s
The followingtable lists warning messages, possible causes, and the actions required to correct each
cause.
Warning M essage
Line 2 of display
Possible Cause Action
Paper Out Tray1 There is no paper in Tray1. Add paper to the tray.
Paper Out Tray2 There is no paper in Tray2. Add paper to the tray.
Paper Out Tray3 There is no paper in tray 3. Add paper to the tray.
Output TrayFull The output trayis full. Remove paper from the tray.
Offset Tray Full The offset output tray is full. Remove paper from the tray.
TonerLow The toner is low. Replace the toner cartridge
soon.
Maintenance Req Maintenance is required. Call service.