Mar 00 Genicom PublicationNo. GEG-99054
microLaser 210 User Guide 4-21
Moving the Printer
Moving the Printer
Follow the guideline s below when lifting or mov ing the printer:
■The printer is very heavy,and should always be lifted by two people. The weight of the
printer without paper tray, toner cartridge, and paper is about 55 lbs (25 kg). Never attempt
to lift the printer alone.
■Tolift the printer, have two individuals facing each other from the front and the rear of the
printer grasp the recessed areas on each side of the printer. Do not lift the printer by grasping
any area other than these recessed areas.
■When lifting the printer,maintain proper lifting posture to prevent injuries.
Moving the Printer a Short Distance
Use the followingprocedure to move the printer a short distance:
1. Turnthe printer off by pressing the [ O ] on the power switch o n the back of the printer.
2. Unplug the AC power cord from the AC wall outlet.
3. Disconnect the printer from the host computer.
4. Wait30 minutes for th e printer to cool.
5. Refer to Chapters 6 through 9 for instructions on m oving installed paper-handling options.
6. Remove the tonercartridge and cover it with an opaque plastic sheet.
7. Move the printer to the new location.
8. Once the printer is in the new location, refer to the Installation Guide included in the origi-
nal printer packaging for installation instructions.
Moving the Printer a Long Distance
Use the followingprocedure to move the printer a long distance:
1. Turnthe printer off by pressing the [ O ] on the power switch on the right side of the printer.
2. Unplug the AC power cord from the wall outlet and from the back of the printer.
3. Disconnect the printer from the host computer.
4. Remove the paper from all of the paper trays.
5. Wait30 minutes for th e printer to cool.