Mar 00 Genicom PublicationNo. GEG-99054
microLaser 210 User Guide 9-7
Removing the Offset Catch Tray
10. Push the tray in until it matches the size of paper that will be prin ted.
11. Insert the plug of the power cord into the AC outlet and turn the printer on by pressing
[I]onthepowerswitchonthefrontleftoftheprinter.
12. Check the display to make suret heprinter is ready for printing.
NOTE: If an error message is shown when you turn the printer on, refer to Chapter 5:
Troubleshooting.
Removing the Offset Catch Tray
Use the followingprocedure to remove the offset catch tray:
1. Pull the output tray all the way out and lower the paper stop.