Publication No. GEG-99054 Genicom Mar 00
3-10 microLaser 210 User Guide
PS Menu
PS Menu
The PS Menu provides access to the PostScriptsettings. Use the following procedure to enter the
PS Menu:
1. Press the MENU buttononthecontrolpanel.
2. Press the NEXT button until the text “PS Menu”i s shown on the second line of the display.
3. Press the SELECT button to enter the PS menu.
4. Press the NEXT button to move through the submenus: Pri nt PS Errors,andManual Feed
TO.
5. Press the SELECT button to enter a submenu.
6. Use the procedures in the following table to access and change th e PostScriptset tings:
Submenus Default
Setting
Available Settings Procedurefor Changing Settings
Print PS Errors
This submenu allows you
to choose to either print
or not print PS errors.
Off On
Off
1. Press NEXT or PREVIOUS to toggle between ON
(print) and OFF (do not print).
2. Press SELECT to save this setting.
Manual Feed TO
This submenu allows you
to set the manual feed
timeout—the number of
seconds the printer
should wait for a manual
feed. A setting of 0 will
cause printer to wait
indefinitely for a manual
feed.
0 0 - 99999 1. Press NEXT or PREVIOUS to increaseor
decrease each digit oft hefive-digit number.
2. Press SELECT to move to the next number.
3. Press SELECT after setting the last d igit to save
the setting.