Genicom microLaser 210

Mar 00 Genicom PublicationNo. GEG-99054

microLaser 210 User Guide 9-13

Solving Offset Catch Tray Problems

NOTE: Ifthemainpapertrayisintheextendedposition,removethetraybeforeopeningtherear

cover.

5. Close the rear cover.

Correcting Miscellaneous Offset Catch Tray Problems

Some offset catch tray problems may not cause an error message and may not interfere with the

operation of the printer. If you are experiencing one of the problems listed below and there is no

error message shown on the control panel display, refer to the procedures in the following sections

to check the possiblecauses of the specific problem.

■Inoperative offset catchtray

■Erratic operation

■Unusu al noise

Inoperative Offset Catch Tray

The following characteristics define this feede r problem:

■The offset catch tray appears to be inoperative.

■When attempting to print to the offset catch tray, the offset catch tray does not respond and

does not transport paper.

■The control paneldoes not display an error code.