Control Panel
I J
H
K
Figure 4. Control panel.
H.Coolant Pump Switch: Controls the coolant pump motor.
I.Power Light: Illuminates when lathe controls are receiving power.
J.STOP Button: Stops all machine functions. Twist clockwise to reset.
K.Jog Button: Starts forward spindle rotation as long as it is pressed.
Carriage |
|
|
|
L |
|
| N |
|
| M | |
| X |
|
|
|
| O | P |
W |
|
|
|
V |
|
| Q |
|
|
| |
V | U |
| R |
S |
| ||
| T |
| |
|
|
|
Figure 5. Carriage controls.
L.4-Way Tool Post: Mounts up to four cutting tools at once that can be individually indexed to the workpiece.
M.Compound Rest Handwheel: Moves the tool toward and away from the workpiece at the preset angle of the compound rest.
N.Coolant Flow Control Lever: Controls the flow of coolant from the nozzle.
O.One-Shot Oiler: Draws oil from the apron res- ervoir to lubricate the carriage ways through various oil ports.
P.Carriage Lock: Secures the carriage in place for greater rigidity when it should not move.
Q . Thread Dial and Chart: Dial indicates when to engage the half nut during threading operations. Chart indicates on which thread dial reading to engage the half nut for specific inch thread pitches.
R.Spindle Lever: Starts, stops and reverses direction of spindle rotation.
S . Half Nut Lever: Engages/disengages the half nut for threading operations.
T.Apron Feed Direction Knob: Changes direc- tion of the carriage or the cross slide feed without having to stop the lathe and move the headstock feed direction lever.
U.feed Selection Lever: Selects the carriage or cross slide for power feed.
V.Carriage Handwheel: Moves the carriage along the bed.
W.Apron: Houses the carriage gearing.
X.Cross Slide Handwheel: Moves the cross slide toward and away from the workpiece.
Model G0740 (Mfg. Since 11/12) |
