3:1
Camera body 503CW
Camera shell
Remove the lens, film magazine, view finder, focusing screen and winding knob.
Remove the screw (830060), coupling (22767) and washer (22799).
Remove the leather (13374), shim (22473), screw (822701) and ISO selector knob (22495).
Do not damage the sliding contacts.
Remove the cap (22470) from the chassis connector and peel back the leather covering two screws
(823335). Remove these screws and firmly push the chassis connector into the body of the camera.
Remove the tripod foot (30763) held by six screws (829755). Remove the two rear screws (829755) and the two front screws (820781).
Fig. 1.
The chassis can now be separated from the camera shell. Ensure that the lens release button (13139), release button (22759), buffer (22367), teflon cone (103773) and distance washers (810620) are not dislodged from the camera shell and lost.
Fig. 2.
Operate the
The side cover is held in position by the spring (30775) secured with two screws (829425) and double sided tape.
Note! If removed, a new cover must be used when the camera is reassembled.
Disassembly
Fig. 1
Fig. 2
Revision 1 | January 2001 |
