5:11
Camera body 503CW | Adjustment |
Check the camera functions. Check that the auxiliary shutter is clear of the internal covers.
Check the release sequence using a micrometer
Mount the micrometer in the exposure button’s cable release socket. Carefully screw in the micrometer’s screw until the camera releases. After releasing it should be possible to turn the micrometer a further 3 to 5 notches before it bottoms. Screw out the micrometer slowly and observe the closing sequence.
1.Key releases to fully released position.
2.Auxiliary shutter closes. Note that the winding knob is blocked all the time until the auxiliary shutter closes.
3.The stop lever disengage giving clearance for the winding knob.
Note! If the release sequence is incorrect the camera should be dismantled from the camera shell and adjusted as previously described in section "adjustment of the release mechanism", page 5:6.
Check that a magazine can be fitted on the camera and that the locking functions work properly.
If the lock does not function the magazine hook can be adjusted by filing.
Ensure when filing that tests are made often and finally that the magazine fits snugly otherwise it will result in play between the camera body and the magazine.
Mount the screen and the focusing hood.
Test run the camera with loaded magazine and a lens fitted.
Check the flash metering system.
Revision 0 | October 1996 |
