Hitachi SJ700-2 Series service manual Fef Fuf Avr

					Default
	Code	Function name	Monitored data or setting				Note
				_FF	_FEF	_FUF
AVR	A081	AVR function select	00 (always on), 01 (always off), 02 (off during deceleration)	02	00	00
	A082	AVR voltage select	200 V class: 200, 215, 220, 230, 240 (V)	200/400	230/400	230/460
			400 V class: 380, 400, 415, 440, 460, 480 (V)
	A085	Operation mode selection	00 (normal operation), 01 (energy-saving operation), 02 (fuzzy operation)		00
	A086	Energy saving mode tuning	0.1 to 100.0		50.0
	A092	Acceleration (2) time setting	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00
	A292	Acceleration (2) time setting,	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00
function		2nd motor
	A392	Acceleration (2) time setting,	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00
		3rd motor
acceleration/deceleration	A093	Deceleration (2) time setting	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00
	A293	Deceleration (2) time setting,	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00
		2nd motor
	A393	Deceleration (2) time setting,	0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)		15.00
		3rd motor
	A094	Select method to switch to	00 (switching by 2CH terminal), 01 (switching by setting), 02 (switching only		00
		Acc2/Dec2 profile	when rotation is reversed)
	A294	Select method to switch to	00 (switching by 2CH terminal), 01 (switching by setting), 02 (switching only		00
and
		Acc2/Dec2, 2nd motor	when rotation is reversed)
mode	A095	Acc1 to Acc2 frequency	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
		transition point
Operation	A295	Acc1 to Acc2 frequency	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
		transition point, 2nd motor
	A096	Dec1 to Dec2 frequency	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
		transition point
	A296	Dec1 to Dec2 frequency	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
		transition point, 2nd motor
	A097	Acceleration curve selection	00 (linear), 01 (S curve), 02 (U curve), 03 (inverted-U curve), 04 (EL-S curve)		00
	A098	Deceleration curve setting	00 (linear), 01 (S curve), 02 (U curve), 03 (inverted-U curve), 04 (EL-S curve)		00
	A101	[OI]-[L] input active range start	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
		frequency
	A102	[OI]-[L] input active range end	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
		frequency
adjustment	A103	[OI]-[L] input active range start	0. to "[OI]-[L] input active range end current" (%)		20.
		current
	A104	[OI]-[L] input active range end	"[OI]-[L] input active range start current" to 100. (%)		100.
		current
frequency
	A105	[OI]-[L] input start frequency	00 (external start frequency), 01 (0 Hz)		00
		enable
	A111	[O2]-[L] input active range start	-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
External		frequency
	A112	[O2]-[L] input active range end	-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
		frequency
	A113	[O2]-[L] input active range start	-100. to 02 end-frequency rate (%)		-100.
		voltage
	A114	[O2]-[L] input active range end	"02 start-frequency rate" to 100. (%)		100.
		voltage
n and deceleratio	A131	Acceleration curve constants	01 (smallest swelling) to 10 (largest swelling)		02
		setting
	A132	Deceleration curve constants	01 (smallest swelling) to 10 (largest swelling)		02
		setting
		Operation-target frequency	00 (digital operator), 01 (keypad potentiometer), 02 (input via O), 03 (input via
frequency	A141		OI), 04 (external communication), 05 (option 1), 06 (option 2), 07 (pulse-string		02
		selection 1
			frequency input)
	A142	Operation-target frequency	00 (digital operator), 01 (keypad potentiometer), 02 (input via O), 03 (input via		03
Operation-target		selection 2	OI), 04 (external communication), 05 (option 1), 06 (option 2), 07 (pulse-string
			frequency input)
	A143	Operator selection	00 (addition: A141 + A142), 01 (subtraction: A141 - A142), 02 (multiplication:		00
			A141 x A142)
	A145	Frequency to be added	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
	A146	Sign of the frequency to be	00 (frequency command + A145), 01 (frequency command - A145)		00
		added
	A150	EL-S-curve acceleration	0. to 50. (%)		25.
Acceleration and deceleration		ratio 1
	A151	EL-S-curve acceleration	0. to 50. (%)		25.
		ratio 2
	A152	EL-S-curve deceleration	0. to 50. (%)		25.
		ratio 1
	A153	EL-S-curve deceleration	0. to 50. (%)		25.
		ratio 2

1 - 6