|
|
|
|
| Default |
|
|
| Code | Function name | Monitored data or setting |
|
|
| Note |
|
|
|
| _FF | _FEF | _FUF |
|
|
|
|
|
|
|
|
|
|
|
| 00 (tripping), 01 (starting with 0 Hz), 02 (starting with matching frequency), 03 |
|
|
|
|
tripping | b001 | Selection of restart mode | (tripping after deceleration and stopping with matching frequency), 04 |
| 00 |
|
|
|
| (restarting with active matching frequency) |
|
|
|
| |
b002 | Allowable | 0.3 to 25.0 (s) |
| 1.0 |
|
| |
or | failure time |
|
|
| |||
|
|
|
|
|
| ||
failure | b003 | Retry wait time before motor restart | 0.3 to 100.0 (s) |
| 1.0 |
|
|
| Instantaneous power | 00 (disabling), 01 (enabling), 02 (disabling during stopping and decelerating |
|
|
|
| |
power | b004 |
| 00 |
|
| ||
to stop) |
|
|
| ||||
| enable |
|
|
|
| ||
|
|
|
|
|
| ||
b005 | Number of restarts on power | 00 (16 times), 01 (unlimited) |
| 00 |
|
| |
instantaneous |
|
|
| ||||
|
|
| |||||
|
|
|
|
|
| ||
b006 | Phase loss detection enable | 00 (disabling), 01 (enabling) |
| 00 |
|
| |
b007 | Restart frequency threshold | 0.00 to 99.99, 100.0 to 400.0 (Hz) |
| 0.00 |
|
| |
|
| 00 (tripping), 01 (starting with 0 Hz), 02 (starting with matching frequency), 03 |
|
|
|
| |
b008 | Selection of retry after tripping | (tripping after deceleration and stopping with matching frequency), 04 |
| 00 |
|
| |
after |
|
|
| ||||
|
| (restarting with active matching frequency) |
|
|
|
| |
Restart | b009 | Selection of retry after undervoltage | 00 (16 times), 01 (unlimited) |
| 00 |
|
|
b010 | Selection of retry count after | 1 to 3 (times) |
| 3 |
|
| |
overvoltage or overcurrent |
|
|
| ||||
|
|
|
|
|
|
| |
| b011 | Retry wait time after tripping | 0.3 to 100.0 (s) |
| 1.0 |
|
|
|
| Electronic thermal setting |
|
|
|
|
|
| b012 | (calculated within the inverter from | 0.20 x "rated current" to 1.00 x "rated current" (A) | Rated current of inverter |
| ||
|
| current output) |
|
|
|
|
|
| b212 | Electronic thermal setting | 0.20 x "rated current" to 1.00 x "rated current" (A) | Rated current of inverter |
| ||
| (calculated within the inverter from |
| |||||
|
| current output), 2nd motor |
|
|
|
|
|
| b312 | Electronic thermal setting | 0.20 x "rated current" to 1.00 x "rated current" (A) | Rated current of inverter |
| ||
| (calculated within the inverter from |
| |||||
|
| current output), 3rd motor |
|
|
|
|
|
function | b013 | Electronic thermal characteristic | 00 | 00 | 01 | 01 |
|
(free setting) |
| ||||||
|
|
|
|
|
| ||
b213 | Electronic thermal characteristic, 2nd | 00 | 00 | 01 | 01 |
| |
thermal | motor | (free setting) |
| ||||
|
|
|
|
| |||
b313 | Electronic thermal characteristic, 3rd | 00 | 00 | 01 | 01 |
| |
Electronic |
| motor | (free setting) |
|
|
|
|
b015 | Free setting, electronic thermal | 0. to 400. (Hz) |
| 0. |
|
| |
frequency (1) |
|
|
| ||||
|
|
|
|
|
| ||
b016 | Free setting, electronic thermal | 0.0 to rated current (A) |
| 0.0 |
|
| |
| current (1) |
|
|
| |||
|
|
|
|
|
|
| |
| b017 | Free setting, electronic thermal | 0. to 400. (Hz) |
| 0. |
|
|
| frequency (2) |
|
|
| |||
|
|
|
|
|
|
| |
| b018 | Free setting, electronic thermal | 0.0 to rated current (A) |
| 0.0 |
|
|
| current (2) |
|
|
| |||
|
|
|
|
|
|
| |
| b019 | Free setting, electronic thermal | 0. to 400. (Hz) |
| 0. |
|
|
| frequency (3) |
|
|
| |||
|
|
|
|
|
|
| |
| b020 | Free setting, electronic thermal | 0.0 to rated current (A) |
| 0.0 |
|
|
| current (3) |
|
|
| |||
|
|
|
|
|
|
| |
| b021 | Overload restriction operation mode | 00 (disabling), 01 (enabling during acceleration and deceleration), 02 |
| 01 |
|
|
| (enabling during constant speed), 03 (enabling during acceleration and |
|
|
| |||
restraint |
|
| deceleration (increasing the speed during regeneration)) |
|
|
|
|
b022 | Overload restriction setting | 0.20 x "rated current" to 1.00 x "rated current" (A) | Rated current of inverter x |
| |||
| 1.50 |
|
| ||||
|
|
|
|
|
| ||
b023 | Deceleration rate at overload | 0.10 to 30.00 (s) |
| 1.00 |
|
| |
overcurrent |
|
|
| ||||
restriction |
|
|
| ||||
|
|
|
|
|
| ||
b024 | Overload restriction operation mode | 00 (disabling), 01 (enabling during acceleration and deceleration), 02 |
| 01 |
|
| |
(2) | (enabling during constant speed), 03 (enabling during acceleration and |
|
|
| |||
| deceleration (increasing the speed during regeneration)) |
|
|
|
| ||
and | b025 | Overload restriction setting (2) | 0.20 x "rated current" to 2.00 x "rated current" (A) | Rated current of inverter x |
| ||
restriction |
|
|
|
| 1.50 |
|
|
b026 | Deceleration rate at overload restriction | 0.10 to 30.00 (s) |
| 1.00 |
|
| |
| (2) |
|
|
|
|
| |
b027 | Overcurrent suppression enable | 00 (disabling), 01 (enabling) |
| 01 |
|
| |
Overload | b028 | Active frequency matching, scan | 0.20 x "rated current" to 2.00 x "rated current" (A) | Rated current of inverter |
| ||
start frequency |
| ||||||
|
|
|
|
|
| ||
b029 | Active frequency matching, | 0.10 to 30.00 (s) |
| 0.50 |
|
| |
|
|
|
| ||||
|
|
|
|
|
|
| |
| b030 | Active frequency matching, restart | 00 (frequency at the last shutoff), 01 (maximum frequency), 02 (set |
| 00 |
|
|
| frequency select | frequency) |
|
|
| ||
|
|
|
|
|
| ||
Software lock |
|
| 00 (disabling change of data other than "b031" when SFT is on), 01 (disabling |
|
|
|
|
|
| change of data other than "b031" and frequency settings when SFT is on), 02 |
|
|
|
| |
b031 | Software lock mode selection | (disabling change of data other than "b031"), 03 (disabling change of data |
| 01 |
|
| |
|
| other than "b031" and frequency settings), 10 (enabling data changes during |
|
|
|
| |
|
|
| operation) |
|
|
|
|
1 - 7
