Honda Power Equipment TPG-7000H-DXE Assembly And Installation Instructions, Check Kit Contents

Tsurumi’s Operation, Service, and Repair Manual

ASSEMBLY AND INSTALLATION INSTRUCTIONS

FOR TSURUMI PORTABLE GENERATOR

BATTERY ENCLOSURE

	7
7	6
6	4
5	5
11
	9
	14
2	1
	10
	12

1

13

3

Ref.	Part No.	Description	Qty
1	F200000260	Tube, Battery Support	2
2	F080000300	Base Plate, Battery	1
3	F241000050	Plate, Battery Shield	1
4	F090000130	Plate, Battery Hold-down	1
5	F100000011	Rod, Hold-down	2
6	F091000031	Clip	2
7	0021506000	Nut, Wing	2
8	- - - - - -	- - - - --	- - -
9	0013708020	Bolt and Washer Assembly	4
		(Tube-to-Frame) (M8X20L)

Ref.	Part No.	Description	Qty
10	0022006000	Nut, Self-Locking	4
11	0013706040	Bolt and Washer Assembly	4
		(Base Plate-to-Tube)
12	0022006000	Nut, Self-Locking	4
13	0013706040	Bolt and Washer Assembly	4
		(Shield to Tube)
14	0022006000	Nut, Self-Locking	4

CHECK KIT CONTENTS

Check to make sure the parts listed above are included in the kit. Contact Tsurumi to obtain any miss- ing parts.

ASSEMBLY OF BATTERY ENCLOSURE

1.Align holes in base plate (2) with holes in battery support tube (1). Install two bolts (9) and two nuts (10).

2.Repeat step 1 for second battery support tube (1).

3.Align holes in plate (3) with holes in battery support tubes (1). Install four bolts (13) and four nuts (14). Tighten all fasteners.

Appendix A Page A-2