Honda Power Equipment TPG-6000H-DX, TPG-2900H-DX Tsurumi’s Operation, Service, and Repair Manual

Models: TPG-4300H-DX TPG-6000H-DX TPG-7000H-DXE TPG-2900H-DX

1 92
Download 92 pages 43.16 Kb
Page 22
Image 22
BDual Voltage Type

Tsurumi’s Operation, Service, and Repair Manual

NOTE:

Check the amperage of the receptacles used referring to Table 2, and be sure not to take a current exceeding the specified amperage.

Be sure that the total wattage of all appliances does not exceed the rated output of the generator.

WARNING:

TO CONNECT AND LOCK A PLUG IN A TWIST LOCK RECEPTACLE, INSERT THE PLUG INTO RECEPTACLE AND TURN CLOCKWISE.

BE SURE TO GROUND THE GENERATOR IF THE CONNECTED ELECTRICAL EQUIPMENT IS GROUNDED.

NOTE:

When the circuit breaker trips off during operation, the generator is overloaded or the appliance is defective.

When the circuit breaker trips, stop the generator immediately. Check the appliance and/or gener- ator for an overload or defect and repair as necessary.

CAUTION:

The 120V duplex receptacle is protected by a GFCI (Ground Fault Circuit Interrupter). The GFCI shuts off the output current from the 120V duplex receptacle when a ground fault occurs in the generator or the appliance.

Please note that other receptacles are not protected by a GFCI.

BDual Voltage Type

(1)Select the voltage using the FULL POWER switch in accordance with the electrical appli- ance. Refer to Table 3.

(2)Operate the generator in the same way as step (a) through step (c) of single voltage type.

Page 19

Operating Instructions

Page 22
Image 22
Honda Power Equipment TPG-6000H-DX, TPG-2900H-DX manual Tsurumi’s Operation, Service, and Repair Manual, BDual Voltage Type