Wireless Manager

Provides information on the currently connected wireless network(s). The following image is an example only.

If more than one wireless device is being managed, the All bar is displayed. Tap the All bar to disable/enable all wireless devices at once.

If a Wi-Fi (802.11) radio is present, the Wi-Fi bar indicates the status of the Wi-Fi connection, such as:

Off

The Wi-Fi radio is off

 

 

On

The Wi-Fi radio is on

 

 

Unavailable

No Wi-Fi networks are available

 

 

Available

Wi-Fi networks are available but not connected

 

 

Connecting

The radio is connecting to a Wi-Fi network

 

 

SSID

The SSID of the connected Wi-Fi network when managed by Wireless Manager

 

 

Network Card

When the radio is connected and managed by the Summit Client Utility

 

 

If the Wi-Fi radio is Off, tapping the Wi-Fi bar turns the radio On. Once the radio is On, the status may cycle through other states such as Available and Connecting before reporting a connection status such as the SSID.

If the Wi-Fi radio is in any other state than Off, tapping the Wi-Fi bar turns the radio Off.

If Bluetooth is present, the Bluetooth bar indicates the status of the connections, such as:

Off

The Bluetooth radio is off

 

 

On

The Bluetooth radio is on

 

 

Visible

The MX9 is discoverable

 

 

If the Bluetooth radio is Off, tapping the Bluetooth bar turns the radio On. Once the radio is On, it may cycle to Visible if the MX9 is discoverable.

If the Bluetooth radio is in any other state than Off, tapping the Bluetooth bar turns the Bluetooth radio Off.

If WAN is On, it is also shown on this panel. When tapped however, WWAN is disabled and the WAN button is removed from this panel. To enable WAN again, open the WAN control panel.

5 - 69