Power Key Functions
The Power key is located at the bottom left of the keypad. The Power On/Off key is a momentary contact. Function is as follows:
When the MX9 is in ... | Pressing the Power key ... |
|
|
Off mode | boots the unit and sets it to the On mode |
|
|
On mode | sets the unit in Suspend mode |
|
|
Suspend mode | sets the unit in On mode |
|
|
Critical Suspend mode | has no effect |
|
|
Backlight off mode | sets the unit in Suspend mode |
|
|
Status LEDs
Several LEDs are located on the front of the MX9 above the integrated speaker. They are:
•System Status (SYS) LED indicates power management status.
•Battery Charging Status (BATT) LED indicates main battery charging status.
•Alpha Mode Status (ALPHA) LED applies to the
•Bluetooth Status LED applies to Bluetooth client functions.
System Status LED
Blinking Red |
| Battery power fail; critical suspend |
|
|
|
Solid Red |
| Main battery low |
|
|
|
Yellow / Amber |
| Initial few seconds when Power key is pressed |
|
|
|
Battery Charging Status LED | ||
|
| |
Off | No battery, no AC power, battery pack not plugged in or no AC power applied | |
|
| |
Flashing Red | Fault, battery pack fault or failure | |
|
| |
Yellow / Amber | Standby, battery pack temperature out of range | |
|
| |
Red | Charging, battery pack charging (icon on touch screen) | |
|
| |
Green | Charged, battery pack fully charged. Connected to external power. | |
|
|
|
Alpha mode Status LED
Green when in alpha mode,
Bluetooth Status LED
Blinking slowly | Bluetooth is active but not connected to a device. |
|
|
Blinking medium | Bluetooth is paired and connected to a device. |
|
|
Blinking fast | Bluetooth is discovering other Bluetooth devices. |
|
|
Unlit | Bluetooth hardware has been turned off or does not exist in the MX9. |
|
|
3 - 4