Removing the MX9 from the Mounted Vehicle Cradle

1. Place one hand on the MX9 and press one of the release latches (located on either side of the cradle docking bay).

2.The MX9 disconnects from the cradle pins and springs forward.

3.Grasp the MX9 and pull it up and out of the vehicle cradle, disconnecting the MX9 I/O port from the charge/ communication port at the base of the docking bay.

Powered Vehicle Cradle Help

The following is intended as an aid in determining whether the MX9 or the vehicle mounted cradle may be malfunctioning.

Issue

Cause

Solution

 

 

 

MX9 docked in cradle

MX9 I/O port not fully connected to

Reseat the MX9 fully into the docking bay.

but cannot work with

communication/charging port in

 

accessory cables

docking bay.

 

connected to cradle.

 

 

 

There are foreign objects inside

Remove the foreign objects and reseat the MX9 in

 

docking bay or cable connectors

the docking bay.

 

 

 

MX9 docked in cradle

MX9 not fully docked.

Check the docking bay is clear of foreign objects

but Docked LED does

 

and reseat the MX9 fully into the docking bay.

not light up.

 

 

 

Power supply not connected.

Check that power cable is securely connected to

 

 

the Power Port at the rear of the cradle.

 

 

 

14 - 25