Parameter | Default | Explanation |
|
|
|
Radio Mode | BG radio: | Specify 802.11a, 802.11b and/or 802.11g rates when communicating |
| BG Rates Full | with the AP. The options displayed for this parameter depend on the type |
| Or | of radio installed in the mobile device. |
| A radio: | Options: |
| BGA Rates Full | • B rates only (1, 2, 5.5 and 11 Mbps) |
|
| |
|
| • BG Rates Full (All B and G rates) |
|
| • G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps) |
|
| • BG optimized or BG subset (1, 2, 5.5, 6, 11, 24, 36 and 54 Mbps) |
|
| • A rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps) |
|
| • ABG Rates Full (All A rates and all B and G rates with A rates |
|
| preferred) |
|
| • BGA Rates Full (All B and G rates and all A rates with B and G rates |
|
| preferred) |
|
| • Ad Hoc (when connecting to another client device instead of an AP |
|
| Default: |
|
| • BG Rates Full (for 802.11b/g radios) |
|
| • BGA Rates Full (for 802.11a/b/g radio) |
|
| Note: |
|
|
|
It is important the Radio Mode parameter correspond to the Access Point (AP) to which the device is to connect. For example, if this parameter is set to G rates only, the MX9 may only connect to APs set for G rates and not those set for B and G rates.
The options for the Radio Mode parameter should be set, based on the antenna configuration, as follows:
Antenna Configuration | Radio Mode |
|
|
A Main and BG Main | ABG Rates Full |
| BGA Rates Full |
|
|
A Main and A Aux | A Rates Only |
|
|
BG Main and BG Aux | B Rates Only |
| G Rates Only |
| BG Rates Full |
| BG Subset |
|
|
Contact Technical Assistance (page
11 - 11