2

Getting Started

Overview

The MX9 is a ruggedized handheld computer targeted for indoor and outdoor use. It is powered by a lightweight main battery that can be removed and replaced without the need for special tools.

MX9 wireless connectivity is secured by user-configured encryption and authentication protocols. The MX9 has an integrated keyboard, outdoor readable touch display, a tethered stylus, Microsoft® Windows® operating system, and many wireless connection options.

The keypad is available in a 62-key or 38-key configuration. The 62-key keypad is also available in an IBM 5250 configuration. Bar code reader options are: an imager or laser scanner integrated in the MX9, or a handheld scanner tethered to the port at the base of the MX9, Bluetooth mobile bar code imagers and scanners, or the Bluetooth Ring Scanner module.

Wireless network connection is accomplished using a Summit WLAN 802.11 radio, WWAN, and Bluetooth. Desk and vehicle cradles, a trigger handle or hand strap, holsters with shoulder straps or belts, clear covers for cases and holsters, Bluetooth scanners and printer, standard and low temperature batteries, and battery chargers are among the many accessories available for the MX9.

About this Guide

This MX9 User’s Guide provides instruction for the system administrator to follow when configuring a MX9 with a Microsoft Windows Mobile 6.5 operating system. Also included are setup and use instructions for the MX9 Battery Charger, Desktop Cradle, and Powered Vehicle Mounted Cradle.

Out of the Box

After you open the shipping carton verify it contains the following items:

•MX9 Hand Held Computer

•Rechargeable battery

•Hand Strap (attached to the MX9)

•Quick Start Guide

•Getting Started Disc

If you ordered accessories for the MX9, verify they are also included with the order. Keep the original packaging material in the event the MX9 should need to be returned for service. For details, see Product Service and Repair (page 16-1).

Initial Setup for MX9

Following are steps you might take when setting up a new MX9. Follow the links for further instruction for each step. Contact Technical Assistance (page 16-1)if you need additional help.

Note: Installing or removing accessories should be performed on a clean, well-lit surface. When necessary, protect the work surface, the MX9, and components from electrostatic discharge.

While the MX9 is in a hazardous location DO NOT:

•Connect an external power source to the MX9.

•Connect a USB device or audio jack to the MX9.

•Connect the Car Power Adapter to the I/O connector at the base of the MX9.

•Remove or install a battery pack in the MX9.

Hardware Setup

1.Connect accessories e.g., hand strap (if necessary), trigger handle, etc.

2.Provide a power source:

•Insert a fully charged main battery.

•Connect a power cable (USB/Power or Serial/Power).

2 - 1