Notification Tab

Setting

Default

 

 

Enable Internal Scanner Sound

Enabled

 

 

Good Scan Vibration

Off

 

 

Bad Scan Vibration

Off

 

 

Internal Scanner Sound

This panel toggles internal scanner sounds on and off. Internal scanner sound, by default, is enabled.

Vibration

Vibration on the MX9 is activated when a scan is completed successfully or with a failure (scan key released before good scan, timeout, or rejected because of Data Options configuration). It is not activated when a trigger or scan key is pressed. The default setting for both Good Scan and Bad Scan vibration is Off.

Enable this parameter when a tactile response on a good scan or bad scan is desired. Scan sounds are accompanied by a tactile response when the internal scanner Sound parameter is enabled. Enable short, medium or long duration for each selection (good scan and bad scan).

When the MX9 does not have vibrate capability, any active vibration setting is ignored.

8 - 6