Front View

1.Battery Charging Pocket

2.Battery Charging Pocket LED

3.Battery Pocket Spring Clip

4.Battery Retaining Clip

5.AC Power port

Installation

Assemble the Power Supply

Assemble the AC adapter for the MX9 Battery Charger before connecting it to the charger.

The AC power supply for the battery charger is shipped with the battery charger. Contact Customer Support (page 16-1)if there is no AC cable.

The battery charger power supply is intended for use with the MX9 battery charger only.

1.Plug the 3-prong end of the cable into an AC wall outlet.

2.Firmly press the female end of the power cable into the male connector on the AC power adapter. An LED on the power adapter illuminates when AC power is available.

3.AC power is now being applied to the power adapter.

13 - 3