Warning: Risk of ignition or explosion. Explosive gas mixture may be vented from battery. Work only in well | |
! | ventilated area. Avoid creating arcs and sparks at battery terminals. |
| |
Wiring Schematic
Connecting to Vehicle Power
The vehicle cradle must be empty. The last connection must be to the vehicle power source.
1.Connect the power cable to the vehicle cradle.
2.Route the cable from the cradle to the DC/DC power supply.
3.Cut the cable to length and strip the wire ends.
4.Route the power cable the shortest way possible. The cable is rated for a maximum temperature of 105°C (221°F). When routing this cable it should be protected from physical damage and from surfaces that might exceed this temperature. Do not expose the cable to chemicals or oil that may cause the wiring insulation to deteriorate. Always route the cable so that it does not interfere with safe operation and maintenance of the vehicle.
5.Remove the lid from the DC/DC power supply by removing only the screws on the side of the lid.
14 - 16