3.Enter the SSID of the desired network in the Network name text box. Be sure to tap the This is a hidden network check box for a non-broadcast SSID.

4.In the Connects to box, select The Internet if the MX9 connects directly to the Internet, select Work if the MX9 con- nects to a network (even if the network provides an Internet connection).

5.Tap Next.

Edit a Network Connection

Double tap the network name to edit the configuration or tap the network name and tap Connect to connect to the net- work.

Network configuration screens are the same as displayed in the previous section.

Switch Control to SCU

1.To switch back to SCU control, select any other profile except ThirdPartyConfig in the SCU Active Config drop down list on the Main Tab (page 11-5).

2.A message appears that a Power Cycle is required to make settings activate properly.

3.Tap OK.

4.Open the Registry (page 5-52)panel and tap Warmboot. Radio control is passed to the Summit Client Utility.

11 - 4