RAM Bracket Mounting

RAM Bracket Assembly mounting holes are on the back of the cradle. The mounting screws fit in Pim nuts and are automatically secured.

The number of RAM balls attached to the back of the vehicle mount cradle are dependent upon the desired RAM mount configuration.

The figure shown below is an example only.

RAM ball mounting screws are included in the mounting kit. Contact Technical Assistance (page 16-1)for the MX9 RAM Mount Kit for the vehicle cradle.

RAM Bracket Mounting Points

1. RAM ball mounted on the back of the vehicle cradle

2. Connecting the vehicle cradle to the assembled RAM Mount Kit

3. Adjusting knob

4. RAM arm

5. RAM ball base mounted to the vehicle

14 - 13