
Chapter 8
•Large, black typefaces look splotchy (not smooth)
The default enhancement setting might not be suitable for the job. Check the setting and change it to enhance text or photographs, if needed. For more information, see Change copy settings.
•Horizontal grainy or white bands in
The default enhancement setting might not be suitable for the job. Check the setting and change it to enhance text or photographs, if needed. For more information, see Change copy settings.
The printer prints half a page, then ejects the paper
Check the ink cartridges
Make sure the correct ink cartridges are installed and the ink cartridges are not low on ink. For more information, see Printer management tools and Understand the Printer Status Report.
HP cannot guarantee the quality of
Paper mismatch
Check the settings
Verify that the loaded media size and type matches the control panel settings.
Solve scan problems
TIP: You can visit the HP online support website at www.hp.com/go/customercare for information and utilities that can help you correct many common printer problems.
•Scanner did nothing
•Scan takes too long
•Part of the document did not scan or text is missing
•Text cannot be edited
•Error messages appear
•Scanned image quality is poor
•Scan defects are apparent
Scanner did nothing
•Check the original
Make sure that the original is loaded correctly. For more information, see Load an original on the scanner glass or Load an original in the automatic document feeder (ADF).
•Check the printer
The printer might be coming out of Sleep mode after a period of inactivity, which delays processing a short while. Wait until the printer displays the Home screen.
•Check the HP software
Make sure that the HP software provided with the printer is installed correctly.
96 Solve a problem