Chapter 8

NOTE: At this time, some portions of this site are not available in all languages.

Solve printer management problems

This section provides solutions to common problems that involve managing the printer. This section contains the following topic:

Embedded web server cannot be opened

NOTE: To use the embedded web server, the printer must be connected to

a network using a wireless connection. You cannot use the embedded web server if the printer is connected to a computer with a USB cable.

TIP: You can visit the HP online support website at www.hp.com/go/customercare for information and utilities that can help you correct many common printer problems.

Embedded web server cannot be opened

Check your network setup

Make sure you are not using a phone cord or a crossover cable to connect the printer to the network.

Make sure the network cable is securely connected to the printer.

Make sure the network hub, switch, or router is turned on and working correctly.

Check the computer

Make sure the computer that you are using is connected to the network.

NOTE: To use the EWS, the printer must be connected to a network. You cannot use the embedded web server if the printer is connected to a computer with a USB cable.

Check your web browser

Make sure the web browser meets the minimum system requirements. For more information, see Embedded web server specifications.

If your web browser uses any proxy settings to connect to the Internet, try turning off these settings. For more information, see the documentation available with your web browser.

Make sure JavaScript and cookies are enabled in your web browser. For more information, see the documentation available with your web browser.

122 Solve a problem

Page 126
Image 126
HP 6600 manual Solve printer management problems, Embedded web server cannot be opened, Check your network setup