Use the Raster Compression feature to select the graphics-compression method:

◦Automatic. The software determines the best compression method to use.

◦Best Quality. This option forces the software to use a lossless compression method. (Lossless means that no data is lost during compression.)

◦Maximum Compression. Where applicable, this option requires the software to always use a lossy compression method (some data is lost).

●Alternative Letterhead Mode

When selected, this option eliminates the need to flip or reload letterhead or preprinted paper in a tray, whether you are printing on one or both sides of the sheet. Load the paper as you would for printing on both sides. If the product tray has an icon that indicates whether to load paper either face-up or face-down, load the paper in opposite orientation of that shown.

When this option is selected, you must use one of the following options in the Paper type setting:

◦Letterhead

◦Preprinted

NOTE: Because Alternative Letterhead Mode is available only if the product is equipped with an automatic duplexing unit, the HP Color LaserJet CP4525 and HP Color LaserJet CP4525n models do not support this option.

Layout Options

The Layout Options setting contains the Page Order setting.

Page Order specifies the order in which the pages of your document are printed. Front to Back prints the document so that page 1 prints first. Back to Front prints the document so that page 1 prints last.

NOTE: The page-ordering operation works on whole sheets of paper rather than on individual logical pages. Accordingly, if you set Pages per Sheet (on the Finishing tab) to be greater than one, the ordering of logical pages on a physical sheet of paper does not change.

108 Chapter 4 HP PCL 6 print driver and HP PS Universal Print Driver for Windows

ENWW