Downloading custom color profiles

Obtain custom color profiles just as you would any other remote-firmware update, using the procedures described in these sections.

Custom color-profile .RFU files are named as follows:

clj####_<what>_<version>.RFU

where:

●#### is the product-model number of the color table

●<what> is a one-word description of what the table does

●<version> is a two-part version number consisting of a major and a minor value For example, some custom color-profile .RFU files that could be available include:

●A simulation of the color settings for the HP Color LaserJet 4650 product: *clj4650_*.RFU

●A remote-firmware-update file that resets your product to its original state: *reset_*.RFU

While every care is taken to ensure a close match with the colors available on the product, several factors can affect the outcome of the match:

●Differences between products within and between a given model line

●paper type

●The age and state of the custom-profile product and the product to which the profile is to be downloaded

●The use or non-use of genuine HP supplies

●Environmental conditions

Remote firmware update by using FTP through a browser

Complete the following steps to update the product firmware by using file transfer protocol (FTP) through a browser.

NOTE: This method is not recommended with Windows Vista or if Internet Explorer 7 is installed on your computer, due to frequent timeouts. A stand-alone FTP client program is recommended for Windows Vista.

NOTE: The following instructions can be used in Windows operating systems only.

1.Make note of the TCP/IP address on the EIO-Jetdirect page. The EIO-Jetdirect page is the second page of the configuration page printout. To print a configuration page, see Determining the current level of firmware on page 198

2.Open a browser window.

ENWW

Remote firmware update 201