Removing external fonts

1.In Windows Vista and Windows 7, click the Start button, click Control Panel, click Hardware and Sound, and then click Printers.

In Windows XP, Windows Server 2003, and Windows Server 2008, click Start, click Settings, and then click Printers and Faxes.

2.Right-click the name of the product.

3.Click Properties.

4.Click the Device Settings tab.

5.Click the External Fonts option. The Properties button appears.

6.Click Properties. The HP Font Installer dialog box appears. The external fonts that are installed appear in the Installed Fonts window.

7.Select the fonts that you want to remove, and then click Remove. The fonts are removed.

8.Click OK to close the HP Font Installer dialog box.

Installable Options

Items under Installable Options are automatically populated and their defaults set when the driver is installed.

The HP Color LaserJet Enterprise CP4020-CP4520 Series product has printing options that you can install and configure in this section. The following controls are available:

●Automatic Configuration

●Tray 3

●Tray 4

●Tray 5

●Duplex Unit (for 2-Sided Printing)

●Allow Manual Duplexing

●Printer Hard Disk

●Job Storage

●Job Separator

●Mopier Mode

Automatic Configuration

Use the Device Settings tab to tell the driver about the hardware configuration of the product. If bidirectional communication is enabled in a supported environment, update this tab by selecting the Update Now setting in the Automatic Configuration setting. The default setting is Off. After an automatic configuration, the setting returns to Off after the changes are made.

If your environment does not support bidirectional communication, the Update Now setting is unavailable, so you must manually configure the options on this tab.

162 Chapter 4 HP PCL 6 print driver and HP PS Universal Print Driver for Windows

ENWW