The name that appears in the Name text box depends on the following conditions:

●If a saved custom paper size has been selected from the drop-down menu on the Paper/Quality tab, then the Name text box shows the name of the selected custom paper size.

●If a standard paper size has been selected on the Paper/Quality tab, then the Name text box shows the default name of Custom .

●If a new name has been typed into the Name text box for the purpose of saving a new size or renaming an existing size, then that new name will remain in the text box until the new size is saved or the dialog box is closed.

If you type a new name into the Name text box, but then do not click Save, you can change the width and height values without losing the name. However, if you close the dialog box without clicking Save, any unsaved name or size values are lost without warning.

Paper size

The width and height values can be changed by typing numeric strings into the edit boxes in the Paper Size group box.

Any entry that is greater than the maximum limits of the width and height control is rounded down to the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height control is rounded up to the minimum valid entry.

If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole millimeter. Any non-numerical entry reverts to the minimum value. Width and height entries are validated when the focus has changed.

The resolution of each control is 1 millimeter or 1/10 of an inch, depending on the current measurement units.

Units

To change measurement units, click one of the options in the Units group box (either Inches or Millimeters).

Custom width and height control limits

The minimum paper size for the HP Color LaserJet Enterprise CP4020-CP4520 Series product is 76 x 127 mm (3 x 5 in) and the maximum is 215.90 x 355.60 mm (8.50 x 14.00 in). The following table summarizes paper size limits for each paper-handling device.

Table 4-1PCL 6 custom paper sizes

Tray

 

Dimensions

Minimum

Maximum

 

 

 

 

 

Tray 1

(100-sheet

Width

76 mm (3 in)

216 mm (8.5 in)

multipurpose)

 

 

 

Length

127 mm (5 in)

356 mm (14.0 in)

 

 

 

 

 

 

 

Tray 2

(250-sheet)

Width

148.0 mm (5.83 in)

216 mm (8.5 in)

 

 

 

 

 

 

 

Length

210.0 mm (8.27 in)

356 mm (14.0 in)

 

 

 

 

 

Tray 3

(500-sheet)

Width

148 mm (5.38 in)

216 mm (8.5 in)

 

 

 

 

 

 

 

Length

210 mm (8.27 in)

356 mm (14.0 in)

 

 

 

 

 

ENWW

Paper/Quality tab features 119