4.Enter a name for the share. Make it short and easy to remember. For example: “HP LaserJet mfp”. Write down this sharename to use later.

5.Click Apply.

Follow these instructions to perform a remote firmware update for products connected over a USB connection:

1.From a command prompt or in an MS-DOS window, type copy /b <FILENAME>\ \<COMPUTERNAME>\<SHARENAME>, where <FILENAME> is the name of the .RFU file (including the path), <COMPUTERNAME> is the name of the computer from which the product is being shared, and <SHARENAME> is the product share name. For example, type the following:

copy /b CP4520fw.rfu\\your_computer\clj4520

NOTE: If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type C:\>copy /b "c:\My Documents\CP4520fw.rfu" \ \your_computer\clj4520

2.Press Enter on the keyboard. The messages described in the section Printer messages during the firmware update on page 199 appear on the control panel. The message 1 file(s) copied appears on the computer screen.

3.The download process begins and the firmware is updated on the product. This can take several minutes. Let the process finish without further interaction with the product or the computer. The messages described in the section Printer messages during the firmware update on page 199 appear on the control panel.

NOTE: The product automatically turns off and then on again to activate the update; this can happen more than once. At the end of the update process, the READY message appears on the control panel. Do not turn off the product or interfere with the update until you see this message.

4.Print a configuration page and verify that the firmware revision number matches the revision of the current update.

Remote firmware update through a Windows network

If the product is shared on a Windows network, follow these instructions:

1.From a command prompt or in an MS-DOS window, type copy /b <FILENAME> \ \<COMPUTERNAME>\<SHARENAME>, where <FILENAME> is the name of the .RFU file (including the path), <COMPUTERNAME> is the name of the computer from which the product is being shared, and <SHARENAME> is the product share name. For example, type the following:

C:\>copy /b c:\CP4520fw.rfu \\your_server\your_computer

NOTE: If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type C:\>copy /b "c:\My Documents\CP4520fw.rfu" \ \your_server\your_computer

2.Press Enter on the keyboard. The messages described in the section Printer messages during the firmware update on page 199 appear on the control panel. The message 1 file(s) copied appears on the computer screen.

3.The download process begins and the firmware is updated on the product. This can take several minutes. Let the process finish without further interaction with the product or the computer. The

ENWW

Remote firmware update 205