If you have more than one driver installed for the product (for example, the default HP PCL 6 Print Driver and the HP PCL 5 Universal Print Driver), the Update Now feature works automatically only on the driver on which it is activated. The other driver will not be updated, and might show the default setting for the specific product model.

Tray 3

This control specifies whether you have Tray 3, an additional 500-sheet tray, installed on the product. Tray 3 comes standard on the HP Color LaserJet CP4525xh product model, and is optional on the other HP Color LaserJet Enterprise CP4020-CP4520 Series models.

Tray 4

This control specifies whether you have Tray 4, an additional 500-sheet tray, installed on the product. Tray 4 comes standard on the HP Color LaserJet CP4525xh product model, and is optional on the other HP Color LaserJet Enterprise CP4020-CP4520 Series models.

Tray 5

This control specifies whether you have Tray 5, an additional 500-sheet tray, installed on the product. Tray 5 comes standard on the HP Color LaserJet CP4525xh product model, and is optional on the other HP Color LaserJet Enterprise CP4020-CP4520 Series models.

Duplex Unit (for 2-Sided Printing)

The duplexing unit comes installed on the HP Color LaserJet CP4525dn and the HP Color LaserJet CP4525xh product models.

NOTE: The HP Color LaserJet Enterprise CP4020-CP4520 Series product supports smart duplexing. The product uses the smart duplexing feature to detect information on both sides of the print job pages and only runs the pages through the duplexing unit if printable information appears on the second side of the page.

Allow Manual Duplexing

Select Allow Manual Duplexing to print on both sides of any supported size and most types of paper (except transparencies, envelopes, and labels). To use this feature, you must reinsert the paper stack into the input tray to print the second side. The product pauses while you make this adjustment.

This setting is enabled by default.

Printer Hard Disk

When this option is installed, the Job Storage option and the Mopier Mode are enabled in the print driver. Use the Job Storage option to store print jobs and then print them later from the control panel. The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job.

Job Storage

When Job Storage is enabled, the product can store print jobs so that you can gain access to those print jobs later at the control panel.

Job Separator

Use this control to specify whether a print job identifier page should be printed between print jobs.

ENWW

Device Settings tab features 163