HP e1200-160 manual Displaying the Current Map, FCP Current Map Display screen

Serial/Telnet User Interface

Caution: If this configuration setting is incorrectly set, processing difficulties may occur. Before changing this setting, evaluate the need for the change and verify the desired setting. HP recommends backing up the router configuration to an external file before making changes to this setting.

To indicate which map is to be the current map, type the number that corresponds to the desired map.

Displaying the Current Map

In the Device Mapping Configuration Menu, choose 2) Display Current Map to view the entries for the current Map.

The Current Map Display screen is displayed.

Depending on whether a Fibre Channel map or a SCSI map was selected, the screen display will differ.

Figure 46 and Figure 47 are illustrations of the different screen displays for Fibre Channel maps and SCSI maps.

Figure 46: FCP Current Map Display screen

Note: The entire list may not fit on one screen. Press N or P to go back and forth between screens.

110 Network Storage Router e1200-160