HP e1200-160 manual Adding a Map Entry to a Scsi Map

Models: e1200-160

1 200
Download 200 pages 21.5 Kb
Page 115
Image 115

Serial/Telnet User Interface

4.In the Device List, to add a listed device to the map, enter the number from the “Num” column.

If the selected device is already mapped, an error message will appear, warning the user about adding a duplicate device.

Adding a Map Entry to a SCSI Map

To add a new entry to a SCSI map:

1.In the Edit Map Entries screen, select Add (A).

2.Enter a Target/LUN ID combination.

If the selected Target/LUN is already present in the map, a prompt is displayed that asks to either confirm the override or enter different address information.

A device selection list is automatically generated.

Note: Devices cannot be mapped to their native port.

Note: A target ID must be defined in the SCSI Configuration to add devices.

3.In the Device List, to add a device to the map, enter the number from the “Num” column. If the selected device is already mapped, an error message will appear, warning about adding a duplicate device.

Note: If a device with LUN = “-‘ is selected, all LUNs for this Target will be added to the map.

Creating a Map Entry for a Fibre Channel Map

To pre-enter a map entry for devices that are not yet online, select Create (C).

Note: All essential information about the device must be known.

A series of questions is displayed. The questions will vary based on the “current” map protocol. Required information includes the LUN address, protocol, port, device name, and device type.

Network Storage Router e1200-160

115

Page 115
Image 115
HP e1200-160 manual Adding a Map Entry to a Scsi Map