HP e1200-160 manual Is an illustration of the Configuration Menu

Serial/Telnet User Interface

Configuration Menu

The Configuration Menu is used to configure the router.

Figure 39 is an illustration of the Configuration Menu.

Figure 39: Configuration menu

Note: The router is shipped with a configuration of default settings that is acceptable for most system environments. Few changes to the configuration should be necessary.

After any configuration changes are made, select A) Save Configuration to record the changes.

If the configuration has been modified to meet company-specific needs, back up the company-specific configuration to an external file. If necessary, these settings can later be restored to the router.

Configuration Menu options:

■1) Baud Rate Configuration changes the baud rate on the serial port.

■2) Ethernet and SNMP (SNMP not supported) Configuration enters Ethernet network settings.

■3) Fibre Channel Configuration configures the settings for the Fibre Channel port.

■4) Parallel SCSI Configuration configures the settings for the SCSI buses.

96 Network Storage Router e1200-160