HP e1200-160 manual Viewing and Changing Scsi Map Information, Scsi Map Dialog box

Visual Manager User Interface

Viewing and Changing SCSI Map Information

To view or change current SCSI map information:

1.In the Mapping Menu screen, select the desired SCSI bus.

2.Select Edit/View in the Map section of the screen.

The SCSI Map dialog box is displayed. Current map information is shown at the top of the dialog box.

3.Enter the new settings and then click the appropriate action button. Figure 25 is an example of the SCSI Map dialog box.

Figure 25: SCSI Map Dialog box

Note: To map Fibre Channel devices to any SCSI initiator on the selected bus, a Target ID must be enabled from the SCSI Bus Configuration Menu. A Target ID should only be added if there is a SCSI initiator that needs to address Fibre Channel devices. Each Target ID can be used to store up to 32 Fibre Channel devices.

72 Network Storage Router e1200-160