Serial/Telnet User Interface

Note: Some operating systems require gaps be removed in the mapping table in order to detect all devices.

Deleting a Map Entry

To delete an entry from a map, in the Edit Map Entries screen, select Delete (D).

For Fibre Channel maps, at the prompt, either enter the LUN ID of the LUN to delete or enter D to delete multiple LUNs.

For SCSI maps, at the prompt, enter the Target ID and LUN ID of the LUN to delete or enter D to delete multiple LUNs.

Clearing the Entries from the Current Map

To remove all entries from the current map, in the Edit Map Entries screen, select

3)Clear Map. A confirmation prompt is displayed.

Filling in the Current Map

To instruct the system to automatically fill in the current map, in the Edit Map Entries screen, select 4) Fill Map.

All new devices are added to the end of the current map. After this operation is completed, the Edit Map Entries Menu is redisplayed.

Note: Devices marked DOWN are not mapped.

Editing the Host List for the Current Map

In the Device Mapping Configuration Menu, choose 7) Edit Host List for Current Map to edit the host list for the current map.

The current map can be associated with hosts available in the host list on the same port where the map is defined. Initially all hosts are associated with an Auto Assigned map. These are built at runtime hosts and cannot be edited or deleted.

Although the options are the same for FCP maps and SCSI maps, the screen display differs. Figure 54 and Figure 55 are examples of the Host List Display screens for FCP and SCSI maps.

118

Network Storage Router e1200-160

Page 118
Image 118
HP e1200-160 manual Editing the Host List for the Current Map