Serial/Telnet User Interface
Figure 56 is an example of the screen display when adding a host to the Host List of an FCP host.
Figure 56: Adding a host to the host list - FCP host
If the host is a SCSI host, the host name and the initiator ID must be entered.
Deleting a Host from the Host List
To remove a host from the Host List, select Delete (D). After entering the number of the host to delete, a confirmation prompt is displayed.
Editing Host information
To change host information, select Edit (E).
Current host information is displayed on the screen. The system will display a series of prompts, allowing changes to be entered.
Note: To retain the current information for a prompt, press Enter at the prompt.
Network Storage Router | 121 |
