
Serial/Telnet User Interface
To view or change configuration settings:
1.Select a menu option
2.Make the configuration changes
3.Select X) Return to previous menu
4.Select A) Save Configuration to record the changes. Ethernet Configuration Menu options:
■1) Change IP address (default: 1.1.1.1) changes the router IP address.
■2) Change IP Subnet Mask (default: 255.255.255.0) changes the router Subnet mask.
■3) Change IP Gateway (default: 0.0.0.0) changes the IP gateway for the Ethernet network.
■4) Change Ethernet Physical Address changes the Ethernet physical address (MAC address).
Caution: If this configuration setting is incorrectly set, processing difficulties may occur. Before changing this setting, evaluate the need for the change and verify the desired setting. HP recommends backing up the router configuration to an external file before making changes to this setting.
The manufacturer always assigns Ethernet physical addresses to the Ethernet adapters.
■5) Toggle Ethernet Mode changes the Ethernet mode. Options include:
—10 Mb/s only
—100 Mb/s (half duplex) only
—100 Mb/s (full duplex) only
—10/100 MPS
■6) Change Hostname changes the name of the host server.
The name can be any combination of alphanumeric characters, up to eight characters.
Network Storage Router | 99 |